If you’ve never used a portable concrete mixer before, you may think it’s very hard, but it really isn’t. Here are some tips that will help you succeed the first time. Read on to learn more.
The first thing you should do is put a couple of gallons of water in the drum and turn the machine on. Next you’ll add a bag of concrete. You can add as many as two 80 pound bags of concrete. While this may seem like a lot, it’s really just enough to set a good sized fence post. This is messy, so wear old clothes and be sure to use proper safety equipment, such as goggles and a mask to prevent inhaling the dust.
You’ll need to use a shovel to help mix the concrete in with the water. Break up any chunks and stir it up a little. Once it’s pretty smooth, add the second bag in the same way.
When you put the second bag into the portable concrete mixer, you will need to work a little slower as the mix thickens. Be sure to mix it well. It should have a consistency like oatmeal. Eyeball it to see if it’s right. You can add a bit more water if you need to, but don’t overdo it. Add it a little at a time.
Once you’ve got your mix the consistency you want, you can set your fencepost. There are two ways to do this. You can shovel the concrete from the mixer to the hole, or you can use the handy tilting mechanism.
Once you have finished your job, be sure to clean your portable mixer right away. Naturally, hardened concrete inside your mixer is not a good thing. Use your water hose to rinse out all the leftover concrete so your mixer will be ready to go next time you need it.
You want to check more about portable concrete mixers to see which one suits your need best. If so, go to http://concretemachinerypro.com/concrete-mixer/portable-concrete-mixer/. It is great supplier worth for checking. In case you are all on demand of concrete batching plant set equipment, you’s better check http://concretemachinerypro.com/concrete-plant/concrete-batch-plant/.